One of the
things I started to do after reaching NJH was to use a traditional stove using
wood to boil water. In summer, we need about 10 litres of drinking water for
our home and to get it boiled, it used to be quite cumbersome till someone
advised to use a stove using wood.
Initially,
it used to be a very difficult . . . the major part being to get the fire
started. 
Then I learnt to do it fast. And I learnt quite a lot . . .
- You need to have patience to start a fire.
- One can quick start a fire using things
     like diesel or kerosene, but it is expensive and dangerous. 
- The best way to start the fire is to start
     burning small twigs. The twigs look very insignificant. But, they
     contribute a lot to start the fire. But, they will not give the amount of
     heat or burn for long to be of use to you. But, you cannot do without
     them. 
- The bigger wood .. .. .. Of course, it is
     the larger wood pieces that give the heat that matters. But, they are of
     no use, if the twigs do not help them get afire. 
- Once the big wood catches fire, one needs
     to supervise it. You have to be around the fire. Many a time, it burns too
     fast that it does not serve it’s purpose. In addition, one needs to push
     them deep into the stove to ensure that the fire stays. 
- In the beginning, I was really
     enthusiastic and used to stuff the stove with quite a lot of firewood. I
     wanted to have a good fire. Then I realised that it does not work. The
     wood, smaller twigs or the larger wood pieces need space to catch fire.
     Congestion causes the fire to die down. 
- You need to give some space between the stove and the vessel to ensure that the fire burns well.
- When I start the process next day, I need
     to ensure that I clean the stove of the ash of the previous day. 
Quite a lot to lessons to learn from such a
simple activity. Issues about giving space and freedom to achieve your objectives . . . contrary to what popular notions are . . .  
 
 
No comments:
Post a Comment